
27
Troubleshooting
All repairing which must be done on the machine should be done
by authorised service agents. When repair is required for your
machine and you are unable to resolve the problem from the
information given below:
• Unplug the machine.
• Close the water tap.
• Contact CDA Customer Care.
‘‘Start/Pause’’ button not
pressed
Press ‘‘Start/Pause’’
button
‘‘Programme Control’’ knob
on position ‘‘0’’
Control’’ knob to desired
Machine door not properly
closed
Valve inlet filter blocked
Machine door not properly
Close the machine door
Discharge hose blocked or
Check he discharge hose
Machine does not
Pump filter blocked Clean the pump filter
Load unbalanced in
machine
Spread the load out
within the machine