Issue Date: 2010-03-02 Page 8 of 13 Report Reference # E336418-A29-UL
2010-10-22
Object/part No. Manufacturer/
trademark
type/model technical data CCN Marks of
Conformity
degree C minimum.
- Bobbin Chang Chun Plastics
Co., Ltd.
T375J V-0, 150degree C, Phenolic, thickness 0.8mm
minimum
QMFZ2 UL
- Bobbin (Alternate) SUMITOMO
BAKELITE CO LTD
PM-9820 V-0, 150degree C, Phenolic, thickness 0.71mm
minimum
QMFZ2 UL
- Core -- -- Ferrite, overall 32.0 by 19.5 by 30.0 mm.. -- --
- Coil Various Various Rated minimum 130 degree C. OBMW2 UL
- Tape Various Various Rated 130 degree C. OANZ2 UL
- Varnish Various Various Rated minimum 130 degree C. OBOR2 UL
Line Choke (L2) Various RC00134 See enclosure 4-07 for details, 130 degree C
minimum.
-- --
- Core -- -- Ferrite, measured OD 21.5mm by 6 mm ID by 9
mm width
-- --
- Coil Various Various Rated minimum 130 degree C. OBMW2 UL
Tubing/Sleeving Great Holding
Industrial Co. Ltd.
TFL,
TFS,
TFT
Rated 200 degree C YDPU2 UL
Heat Sink (HS1)
(Primary)
-- -- Aluminum material, see enclosure 4-08 for details -- --
Heat Sink (HS1)
(Primary) (Alternate)
-- -- Aluminum material, see enclosure 4-09 for details -- --
Heat Sink (HS2)
(Secondary)
-- -- Aluminum material, see enclosure 4-10 for details -- --
Heat Sink (Cover)
(Primary)
-- -- Aluminum material, see enclosure 4-11 for details -- --
Heat Sink (Chassis)
(Primary)
-- -- Aluminum material, see enclosure 4-12 for details -- --
Tubing (For HS1) CHANGYUAN
ELECTRONICS
(SHENZHEN) CO
LTD
CB-HFT FEP, PTFE, PVC, TFE, neoprene, polyimide or
marked VW-1; rated minimum 125 degree C,
minimum 300 V, see enclosure 4-08 and 4-09 for
details, thickness 0.4 mm minimum.
YDPU2 UL
Tubing (For HS2) CHANGYUAN
ELECTRONICS
(SHENZHEN) CO
LTD
CB-HFT FEP, PTFE, PVC, TFE, neoprene, polyimide or
marked VW-1; rated minimum 125 degree C,
minimum 300 V, see enclosure 4-10 for details,
thickness 0.4 mm minimum.
YDPU2 UL
