21
1. Turn the ignition key to the OFF
position.
- And -
2. Remove the 12 volt (+) positive
battery cable from the battery
post. Ensure the terminal cannot
contact the battery post.
Important: If the ignition key is
NOT accessible:
A. Disconnect the 12 volt positive
(+) battery cable (located in the
left, front underhood area).
- And -
B. Cut all three exposed 12V
positive cables. The cables are
identified by the yellow First
Responder labels.
Note: After disabling 12V power, wait
at least 10 seconds to allow
any un-deployed air bag
reserve energy to dissipate.
To disable 12V power you must:
Note: The 12 volt
battery cables have
lever type, quick
release terminals.
1
2
B. Cut here
