5 | P a g e
Step 2 - Programming:
RS-351 programming:
Next, select the “ADS (iData)” Data Port Protocol in option 12 of Installer Feature Programming as follows:
Step 1) Turn the ignition key “ON”, then “OFF”
Step 2) Within 5 seconds of step 1, press the valet switch 10 times to access installer features.
~ The unit will click and the status light will turn on.
Step 3) Within 10 seconds of step 2, press the valet switch 12 times to access option 12 (data port protocol).
~ The unit will click 12 times.
Step 4) Change the feature to value 2 by pressing the unlock button on a remote that comes with the RS-351.
~ The unit will click twice.
Step 5) To exit programming, turn the ignition key “ON” then “OFF”. Or, you can wait 10 seconds for programming
mode to expire.
NOTE: If you wish to change more features, see feature programming on page 11 of the installation
instructions booklet that comes with the RS-351.
OL-MBD-GM1 programming:
First, select “DATA MODE” in installation mode selection, then proceed with the module programming procedure:
