80n
Heating and ventilation
Air distribution
You can direct the air flow onto
the windows , toward the
upper body and into the foot-
well . All intermediate settings are
possible. In this position , a small
volume of air is directed onto the
windows in order to keep them free of
condensation.
A "6 o'clock" position is recommended
as the normal operating setting.
Temperature
In order to increase the temper-
ature of the passenger compart-
ment, turn to the right (red). For
rapid heating, turn completely to the
right. Then select an interior tempera-
ture which is pleasant for you.
Air supply
You can select blower speeds
from 1 to 4. Both heating and
ventilation become more effec-
tive as the air flow rate is increased. In
position 0, the blower and the heater
are switched off.
Draft-free ventilation
The outlets for the occupants' upper
body area can be adjusted to suit your
personal preferences:
Use the rotary dial (2) to open and close
the vent throughout an infinitely-vari-
able range. With the levers (1), you can
direct the air flow to the side. Adjust the
air flow up or down by rotating the vent
grill.
Set the outlets so that the air flows past
you and is not directed straight at you.
367de224
Rapid ventilation
1 Set the blower speed control for the
air flow rate to position 4.
2 Turn the rotary temperature control
completely to the left (blue). Then
select an interior temperature which
is pleasant for you.
3 Rotary control for air distribution in
position .
4 Open the outlets for the upper body
area.
Online Edition for Part No. 01 41 0 155 690 - © 09/00 BMW AG
