The types of bulb fitted to
your motorcycle are listed
in the section entitled "Technical
data".
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Replacing low-beam and
high-beam headlight bulb
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1 and work the
instrument panel up out of the
holders.
Lay the instrument panel aside.
Switch off the ignition.
Disconnect plug 1, counter-
holding the bulb under the rub-
ber cap.
Remove rubber cap 2.
8
87
z
Maintenance
