Produits de la Marque Blomberg

Owner’s Guide & Installation Instructions

11 / English

Installation Instructions

Allowable Clearances for Undercounter Installation

Thedimensionsarefortherecommendedspacing.Counterdepthshouldbe23.5-24.5”(60-62cm).

Custom undercounter installation – Washer only

Minimumcounterwidthshouldbe50”(127cm)forapairofBlombergwasher&dryer.

Customundercounterinstallation–Washer&Dryer

50Ó

(127 cm)

Allowable Clearances for Closet Installation

When installed in closet (washer only/washer dryer stacked) :

Sides, Rear, Front 1/2 in. (1.27 cm), Top= 1 in. (2.54 cm)

Closet door ventilation requirement: A louver having minimum 23 in2 (148 cm2) air opening located at

3 in (7.62 cm) from the bottom of closet door.

Stacked Installation

You can stack your Blomberg washer and dryer (model no: DV 16540 NBL00) by using a special

stackingkit(PartNo.2967100100).Ifnecessary,consultyourdealerortechnicalserviceforsupplying

the stack kit. In stacked closet installation, following configuration is necessary:

A louver having minimum 23 in2 (148 cm2) air opening located at 3 in (7.62 cm) height from the

bottomofclosetdoor(forwasher)&Alouverofminimum46in2(297cm2)airopeninglocatedat3in

(7.62 cm) distance from the top of closet door (for dryer).

Removing packaging reinforcement

Tilt the washer to remove the packaging reinforcement. Remove the packaging reinforcement by

pulling the ribbon.