21
If you ever forget the password to log in, you may press the RESET
button up to 6 seconds to restore the factory default settings.
Mode=Routing
Encapsulation=PPPoA
Multiplex=VC
VPI=8
VCI=35
100 IP available (from
192.168.1.100 to
192.168.1.199)
2.2 TCP/IP Configuration
PCs must have an Ethernet interface installed properly and be connected to the
router either directly or through an external repeater hub, and have TCP/IP installed
and configured to obtain an IP address through a DHCP server or a fixed IP address
that must be in the same subnet as the router. The default IP address of the router
is 192.168.1.254 and the subnet mask is 255.255.255.0 (i.e. any attached PC must
be in the same subnet, and have an IP address in the range of 192.168.1.1 to
192.168.1.253). The best and easiest way is to configure the PC to get an IP
address automatically from the router using DHCP. If you encounter any problems
accessing the router’s web interface it may also be advisable to uninstall any kind of
software firewall on your PCs, as they can cause problems accessing the
192.168.1.254 IP address of the router. Users should make their own decisions on
how to best protect their network.
Please follow the steps below for your PC’s network environment installation. First of
all, please check your PC’s network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to your Windows-
related or other operating system manuals.
Any TCP/IP capable workstation can be used to communicate with
or through the WebShare Wireless N ADSL2+ Router. To
configure other types of workstations, please consult the
manufacturer’s documentation.
Configuring PC (Windows 7)
Go to Start / Control Panel (select Large/Small Icon). In the
Control Panel, double-click on Network and Sharing Center icon.
