4 5
D5636XXL, D5656XXLHS
XXL DISHWASHERS
U.S. Metric
Height (Adjustable)* 34-3/8˝ to 36-1/2˝ 873 mm to 927 mm
Width 24˝ 610 mm
Depth (Includes high loop) 22-7/8˝ 581 mm
DepthW/handle
(D5634XXLHS, D5654XXLHS,
D5894XXLHS)
24-7/8˝ 632 mm
Depth W/Door Open 49-1/2˝ 1257 mm
Weight 110 Ib 50 kg
Technical Data
Electricity 120V, 60Hz, 15 amp
Water pressure 4.2 - 140 psi,
0.03-1.0 MPa,
0.3-10 Bar
Heating element 1200 watt
Max loading 1300 watt
UNIT DIMENSIONS
Door
5-3/8" to 7-3/8"
137 mm to 187 mm
24"
610 mm
2-7/8"
73 mm
3-3/8"
86 mm
*34-3/8" to 36-1/2"
*873 mm to 927 mm
2"
50 mm
22-7/8"
581 mm
49-1/2"
1257 mm
24-7/8"; 632 mm
D5634XXLHS, D5654XXLHS, D5894XXLHS
9"
229 mm
24"
610 mm
24"
610 mm
4"
102 mm
5-3/8"
136 mm
34-3/8" to 36-1/2" minimum
873-927 mm
2"
51 mm
The best place for your dishwasher is in the kitchen near
the sink. This makes it easier to connect the water and
drain supply lines.
A built-in dishwasher must be enclosed on the top, both
sides and the back.
The power-supply receptacle for the appliance shall
be installed in a cabinet or on a wall adjacent to the
undercounter space in whitch the appliance is to be
installed.
The electrical and water supplies should enter through
the area indicated by the shading on the illustration at
right. Preferably, they should come through the right side
of the machine. The access hole must be round and
smooth and no bigger than 1-1/2˝ (38 mm) in diameter. If
the partition is metal, it needs to be covered with an edge
protector. Use caution when the appliance is installed
or removed, to reduce the likelihood of damage to the
power-supply cord.
Cutout Dimensions
U.S. Metric
Height 34-3/8˝ to 36-1/2˝ 873 to 927 mm
Width 24˝ 610 mm
Depth 24˝ 610 mm
PREPARING THE LOCATION
* Total height can be reduced by 1/2˝ (13 mm) by removing upper trim, and lowering side trim (2).
CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM
492169 Install DW16 USA EN Rev 01.indd 4 2015-01-13 11:12:35
