4
3. Control Elements:
3.1 MOD-16PRO, PLL UHF Diversity Receiver
FRONT PANEL
1 We are afraid you can not use the MOD-16R if youPower Switch:
don't switch the Power ON!
2 You can adjust the right values through these two keysUP/DOWN Keys:
once the MENU is activated.
3 This double digit display shows you the number of channel operatingDISPLAY:
on your MOD-16PRO. The same number must appear on your Transmitter
for proper functioning.
4 It shows the level of the incoming audio signal. When "0"AF Display:
LED lights up the incoming audio signal is optimized and will not present
distortion. If the "+6" LED lights up, the audio signal is overloaded and
you will hear distortion. If only the "-12" LED lights up only 10% of the
available signal reaches the Receiver. For optimal sound reproduction,
please do not exceed the "0" level.
5 It shows the level of the incoming radio signal. Optimum receptionRF Display:
is granted when all the LEDs light up. If no LED lights up, there is minimum
or no radio signal coming into the Receiver. If only a few LEDs light up you
may still operate the system but it means you are in a poor reception mode
due to Antenna positioning, distance in between Receiver and Transmitter.
6 Via this key you can activate the desired function describedMENU Key (SET):
above.
7 Adjust this knob to select the right modelling preset you wishModeller:
to perform. There are total 16 options for you. Please refer to 5. Modelling
Technology for Microphones for further details.
9
1
9
8
7
234
5 6
Ok, enough with numbers. Let's start to familiarize with your MOD-16 System.
First of all, the MOD-16PRO Receiver:
