3.2 Configure manually
3.2.1 AP Configuration
Here describes how to setup AP without security setting.
To setup AP with security, please read 3.3.3.
At Basic Setting page：
1.Select B/G or B+G
mode
2.Set AP mode
3.Set SSID
4.Select channel
5. Apply
3.2.2 Client Configuration
Notice：Step 3. Infrastructure is for connecting AP and Ad hoc is for
connecting another client.
Use Site Survey (3.3.3) to scan and connect to AP
At Basic Setting page：
1.Select B/G mode or
B+G mode
2.Set Client mode
3.Set Infrastructure/Ad hoc
4.Set SSID the same as to
be connecting AP.
5. Apply
Enable MAC change, set new
MAC in TCP/IP page
