2
2
English
802.11 a/g Wireless AP
WLA
5000AP
Installation Steps
1. Please install your network cards first before the AP
2. Screw-in the antenna (clockwise) into the Antenna connector
3. Connect the power and LAN cable to the back
4. Use your wireless card to do a site survey, the default SSID is airlive
5. If you need to change AP’s configuration, please follow the procedure
below:
The AP mode’s default IP address is 192.168.1.1. Please make
sure your computer IP is in the same subnet as the AP (i.e.
192.168.1.x)
Open the web browser and enter 192.168.1.1.
Enter the Password airlive.
Changing Firmware
The default firmware is AP+WDS firmware, the AP mode and WDS mode
uses the same firmware.
If you need to use the Client mode feature, you have to change the firmware.
Please follow the instruction below:
1. Open your web browser, enter your AP’s IP address (AP mode
default is 192.168.1.1).
2. When you are asked about the password. Please enter airlive in
the password field.
3. When the following screen appears. Please click on the System
Tools.
English
