iv
Safety Notices
This guide uses warnings and cautions to denote hazards
WARNING Warning denotes a hazard. It calls attention to a procedure, which if not correctly
performed or adhered to, could result in injury or loss of life. Do not proceed beyond
a warning until the indicated conditions are fully understood and met.
CAUTION Caution denotes a hazard. It calls attention to a procedure, which if not correctly
performed or adhered to, could result in damage to or destruction of the instrument.
Do not proceed beyond a caution until the indicated conditions are fully understood
and met.
General Safety Information
The following general safety precautions must be observed during all phases of
operation, service, and repair of this Test Set. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the Test Set. Agilent
Technologies assumes no liability for the customer’s failure to comply with these
requirements.
WARNING This is a Safety Class I Test Set (provided with a protective earthing ground,
incorporated in the power cord). The mains plug shall only be inserted in a
socket outlet provided with a protective earth contact. Any interruption of the
protective conductor inside or outside of the Test Set is likely to make the Test
Set dangerous. Intentional interruption is prohibited.
DO NOT operate the product in an explosive atmosphere or in the presence of
N4010-90086.book Page iv Friday, April 4, 2014 3:12 PM
