7.1 Option list
Options Values Description
Delay start From 1 to 24 hours
OFF (default value)
Delay the start of the pro-
gramme.
XtraDry ON
OFF (default value)
Activate this option if you
want to boost the drying
performance. Refer to spe-
cific information provided in
this chapter.
ExtraHygiene ON
OFF (default value)
The use of this option sani-
tizes cutlery and tableware.
During the last rinsing
phase, the temperature stays
at 70 °C for at least 10 mi-
nutes.
Settings Enter appliance settings
7.2 How to set an option
The option list will show only the options
applicable to the currently selected
programme. Non applicable options are
not visible.
Some options are not compatible with
each other. When you set 2 options that
are not compatible with each other, the
appliance will automatically deactivate
one of the options.
When the programme is completed or is
cancelled the options are set to the
default values.
1. Press the Option key.
2. Select an option.
The display shows the option value
indicated in parenthesis.
3. Press the OK key to change the value
from OFF to ON or vice versa.
If the selected option is Delay start, when
you press the OK key the display shows
the number of hours available for the
delay start. Select the number of hours
and press again the OK key to confirm.
4. To go back to the programme list,
press repeatedly the Option key until
the display shows the selected
programme.
7.3 XtraDry
Activate this option when you want to
boost the drying performance. With use
of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The XtraDry option is a permanent
option for all programmes other than
ECO 50° and need not to be selected at
every cycle.
Every time ECO 50° is activated, XtraDry
option is off and needs to be chosen
manually. In other programmes, the
setting of XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Activating XtraDry option deactivates
TimeSaver.
7.4 TimeSaver
This option increases the pressure and
the temperature of the water.
The washing and drying phases are
shorter. The total programme duration
decreases by approximately 50%.
www.aeg.com12
