24
Operating instructions
Set and start the programme
Push the plug into the socket.
Open the water supply.
Close the dishwasher door.
Turn the programme selector dial clockwise, until the letter of the required
programme is opposite the indicator mark on the control panel.
If necessary select the temperature of the main wash according to the
instructions in the "Washing programmes" chart (see "Required
pushbuttons").
If no temperature button is depressed, the water will be heated up to 65°C.
Press the On/Off pushbutton; the pilot light comes on and the programme
starts.
In general it is not advisable to open the door while the machine is working;
if the door is opened however, a safety device ensures that the machine
stops.
If you wish to interrupt the wash programme at any time press the On/Off
button.
Depress the On/Off button again and the programme will start from the
point where it was interrupted.
At the end of the programme
At the end of the washing programme the machine stops automatically.
The pilot light remains on until the On/Off button is depressed.
Switch off the dishwasher by pressing the On/Off button and open the door.
When the wash programme has finished, it is recommended that the
dishwasher is unplugged and the water tap turned off.
