Operating Instructions
29
...warning tones indicating a fault in the dishwasher.
• If one or two repetitive warning tones can be heard after the start of
a programme, they indicate a fault in the dishwasher that you can
probably rectify yourself.
After rectifying the fault, press the button for the wash programme
that has been started and close the door of the dishwasher. The wash
programme should continue.
If the same warning tone is heard again, please contact AEG Service
Force.
• If more than two repetitive warning tones are heard after the pro-
gramme start, please contact AEG Service Force. The Service Centre
will need to know the number of tones and which indicators on the
control and display field are flashing.
Symptom Possible Cause Solution
1 continuously repeated
warning tone can be heard;
the programme display is
flashing in the control and
display field and the
WATER control indicator is
permanently illuminated:
no water is running into the
dishwasher.
Tap is closed. Open tap.
The filter in the
threaded hose fitting is
blocked.
Clean the filter in the
threaded hose fitting.
The water inlet hose is
not correctly laid.
Check hose installation.
2 warning tones that are
continuously repeated can
be heard and the DRYING
indicator on the control and
display field is flashing.
The sink outlet is
blocked.
Clean the sink outlet.
The water drain hose is
not correctly laid.
Check hose installation.
3 warning tones that are
continuously repeated can
be heard and the DRYING
and END indicators on the
control and display field are
flashing.
The leak prevention sys-
tem has been triggered.
Close the tap and contact
AEG Service Force.
