
Operating Instructions
29
4) The consumption figures were recorded under standard conditions. They are dependent
on the loading of the dish racks. Variations are therefore possible in practice.
5) Test programme.
6) When the hardness setting is electronically adjusted to 10, the length of the dishwashing
cycle may be slightly longer.
Starting a dishwashing cycle
0 1. Open the dishwasher door.
2. Check that the dishes and cutlery are stacked in the dishwasher in such
a way that the spray arms are free to rotate.
3. Turn on the tap fully.
4. Press the ON/OFF button.
The LED in the ON/OFF button will illuminate.
5. Press the relevant button for the cycle required (see “Cycle Table”).
The cycle display will become illuminated.
6. Close the dishwasher door.
The dishwashing cycle will begin.
3
If an acoustic error message can be heard after the cycle has begun,
please read the section “What to do if ...”.
Changing/interrupting/aborting a dishwashing cycle
3
Only change or interrupt a dishwashing cycle that is in progress if it is
absolutely necessary. After the appliance has been closed again, the air
that has entered will be heated significantly and expand. As a result,
water may collect in the base of the appliance and trigger the anti-
flood system.
Changing a dishwashing cycle
3
If you would like to change the dishwashing cyclebefore closing the
dishwasher door, briefly press the button for the new dishwashing
cycle.
If you would like to change the dishwashing cycle after the cycle has
commenced, proceed as follows:
1
Hot steam may escape when the dishwasher door is opened. There is a
risk of scalding! Carefully open the door of the dishwasher.
0 1. Open the door of the dishwasher. The dishwashing cycle will stop.