Operating Instructions
16
3
If other indicators are also illuminated, this means that a dishwashing
cycle has been activated. The dishwashing cycle must be deselected
(RESET):
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.
All other indicators will go out.
3. Press the function buttons 1 and 2 simultaneously and keep them
pressed.
The LED indicators in function buttons 1 to 3 will flash.
4. Press function button 2 again.
The LED indicator for function button 2 will flash.
The
L display will indicate the current setting:
5. Pressing function button 2 activates and deactivates the rinse aid dis-
pensing function.
6. If the rinse aid dispensing function has been correctly set, press the ON/OFF
switch.
The setting of the rinse aid dispensing function is now saved.
Adding rinse aid
If you are using dishwasher detergent and rinse aid separately, add the
rinse aid:
– Prior to using the dishwasher for the first time
–When the
H indicator on the control panel is illuminated.
The rinse aid compartment is on the inside of the dishwasher door.
0 1. Open the door.
2. Press the rinse aid compartment
release button with your finger.
3. Fully open the rinse aid compartment
lid.
The L display is flashing:
Inflow of rinse aid is activated (factory setting)
The L display is not flashing:
Inflow of rinse aid is deactivated
