25
Servicing
Certain problems are due to lack of simple maintenance or oversights, which
can be solved easily without calling out an engineer.
Before calling our Service Centre, please check whether you can rectify the
fault yourself by following the instructions given below. Should this
information be of no assistance to you in a specific case, please contact our
Service Centre.
The machine will not start
● The door has not been properly closed.
● The plug is not properly inserted in the power socket.
● There is no current at the socket.
The dishwasher does not fill with water
● Ensure the water tap is open.
● Ensure the mains water supply has not been cut off.
● The inlet hose may be squashed or bent.
Reposition correctly the inlet hose.
● The inlet hose may be clogged.
Clean the filter at the end of the inlet hose.
The filters are blocked
● Clean the filters (refer to "Care instructions").
The spray arms are not rotating
● Ensure that the crockery is loaded correctly.
The dishwasher will not drain
● The drain hose may be squashed or bent.
Reposition the hose.
● The sink may be blocked. Clear any blockages.
● The drain hose extension is not correct.
Follow the instructions for connecting to the waste.
● There is no vent in the end of the drain hose.
