8.3 Setting and starting a
programme
Starting a programme
1. Open the water tap.
2. Close the appliance door.
3. Turn the knob until the programme
marker is aligned with the
programme you want to set.
• On/off indicator comes on.
• Start indicator starts to flash.
4. Press Start.
• The programme starts and the
indicator of the washing phase is
on.
• On/off indicator and start
indicator are on.
Starting a programme with
delay start
1. Set the programme.
2. Press Delay to delay the start of the
programme of 3 hours.
The delay indicator comes on.
3. Press Start.
Start indicator comes on.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. When
you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown opearates
1. Press and hold Start until the start
indicator starts to flash.
2. Press Start to start the programme.
Cancelling the programme
Press and hold Start until the start
indicator starts to flash.
Make sure that there is detergent is the
detergent dispenser before you start a
new programme.
End of the programme
When the programme is completed the
indicator is on. If you do not
deactivate the appliance within 5
minutes all indicators goes off. This helps
to decrease energy consumption.
1. To deactivate the appliance, turn the
knob until the programme marker is
aligned with the on/off indicator.
2. Close the water tap.
9.
HINTS AND TIPS
9.1 General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the
environment.
• Remove larger residues of food from
the dishes into the waste bin.
• Do not pre-rinse dishes by hand.
When needed, use the prewash
programme (if available) or select a
programme with a prewash phase.
• Always use the whole space of the
baskets.
• When loading the appliance, make
sure that the dishes can be
completely reached and washed by
the water released from the spray arm
nozzles. Make sure that items do not
touch or cover each other.
• You can use dishwasher detergent,
rinse aid and salt separately or you
can use the multi-tablets (e.g. ''3in1'',
''4in1'', ''All in 1''). Follow the
instructions written on the packaging.
Multi-tablets are usually suitable in
areas with a water hardness up to 21
°dH. In areas exceeding this limit,
rinse aid and salt must also be used. If
you use multi-tablets you can select
the Multitab option (if available). This
option increases the cleaning and
ENGLISH
45
