Indicator lights
End of programme
Illuminates when the washing programme has
ended.
It also has added functions of visual signalling
as:
• the setting of the water softener,
• activation/deactivation of the rinse aid dis-
penser,
• intervention of an alarm due to the malfunc-
tion of the machine.
Salt refilling
2)
Illuminates when special salt needs to be filled.
It can remain illuminated several hours after the
salt has been filled.
Rinse aid
2)
Illuminates when rinse aid needs to be filled.
1) As soon as you select a washing programme, the phase indicator lights for that programme will start flashing.
As the programme starts, the phase indicator lights turn off except for the indicator light of the phase in
progress which will remain lit with a static light.
2) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling
with salt and rinse aid is necessary.
Function buttons
The following functions can be set with the help of these buttons:
• setting of the water softener,
• cancel a washing programme or a delay start in progress,
• activation/deactivation of the rinse aid dispenser when Multi-tab function is active.
Setting mode
The appliance is in setting mode when all programme lights are illuminated.
Always remember that when performing operations such as:
• selecting a washing programme
• setting the water softener
• activating/deactivating the MULTITAB function
• activating/deactivating the rinse aid dispenser
the appliance MUST be in setting mode.
If a programme light is illuminated, the last performed programme is still set.
In this case, to return to setting mode, the programme has to be cancelled.
To cancel a set programme or a programme in progress: Simultaneously press and hold
the two RESET buttons (B and C) until all the programme button lights illuminate. The
programme has been cancelled and the machine is now in setting mode.
6
Control panel
