Adjusting the dose
According to the finish and drying results obtained, adjust the dose of rinse
aid by means of the 6 position selector (position 1 minimum dosage, position
6 maximum dosage).
The dose is factory set in position 4.
Increase the dose if there are drops of
water or lime spots on the dishes after
washing.
Reduce it if there are sticky whitish streaks
on the dishes or a bluish film on glassware
or knife blades.
Top up the rinse aid when the indicator light on the control panel
illuminates.
16
Operating instructions
156997 11/0en 11-09-2006 8:53 Pagina 16
