nstruction book

Cancelling the drying phase

In case you do not want to wait until the drying phase is completed, you

can cancel it.

1. Press in the On/Off button.

2. Open the door. The drying phase is cancelled.

Setting the delay start

The programme start can be delayed between 1 and 19 hours.

1. Press in the On/Off button.

2. Press the delay start button repeatedly, until the required delay

shows on the display. Indicator lamp for the delay start button is lit.

3. Press the button for the required programme.

4. The remaining time to the start is showed on the display. After the

set delayed start time has elapsed, the programme starts.

Changing the delayed start:

If the programme has not started, you are still able to change the set time

with the delay start button.

Cancelling the delayed start:

If the programme has not started, the delayed start can be cancelled. Press

the delay start button repeatedly

, until the running time of the selected pro-

gramme appears on the display. The required programme starts immediately.

Switching the dishwasher off / unloading

Switch the dishwasher off, when the indicator lamp for the programme

cycle end is lit or the display shows 0.

1. Press in the On/Off button.

2. Leave the dishes in the dishwasher for approx. 15 minutes after

the end of the programme so that they dry better and cool down.

3. Check the filters to see if they need to be cleaned when the dish-

washer has finished the programme.

Hot dishes are sensitive to mechanical shocks. Always let the dis-

hes cool down before unloading.