45
I
nstruction book
Starting the programme
1. Scrape or rinse off solid food remnants.
2. Load the dishwasher.
3. Put the correct amount of detergent into the detergent dispenser
and close the lid.
4. Close the door.
5. Press in the On/Off button. All programme indicator lamps are lit.
6. Press in the required programme button (see programme chart).
All other programme indicator lamps goes out. The lamp allways
indicates which part of the selected cycle the dishwasher is in.
Disrupt the programme temporarily
1. Open the door. The programme stops.
2. The programme indicator lamp is lit.
3. Close the door and the programme continues after about 6 seconds.
Open the door carefully when the dishwasher is running, since hot
steam may escape.
Cancelling the programme
1. Press and hold in the combination buttons, the machine goes to
starting position and all programme indicator lamps are lit.
2. Release the buttons. The programme is now cancelled and a new
programme can be selected.
If you switch the dishwasher off with the On/Off button, the selected
programme is not finished, it is only disrupted. When you start the
dishwasher again, the programme will continue.
Pause function
With the paus function the programme can be temporarily disrupted for a
short period of time.
1. Press in the On/Of
f button. The programme stops.
2. All lamps goes out.
3. When you want the programme to continue again, you press the
On/Off button. The programme continues.
The programme should not be paused for any longer than necessary,
because the water inside the dishwasher has cooled down and must
be heated again which increases the power consumption.
Using the appliance
