Use of "3 in 1" combi detergents
These products are detergents with a combined cleaning, rinsing and salt
function.
1. Check whether these detergents are suitable for your water
hardness. Follow the manufacturers instructions.
2. Set the "3 in 1" function.
3. Before the start of the washing programme put the "3 in 1"
detergent in the detergent dispenser.
NOTE: If the drying results are not satisfactory we recommend that you:
1. Fill up the rinse aid dispenser with rinse aid.
2. Activate the rinse aid dispenser and set the rinse aid dosage to
position 2.
If you decide to turn back to the use of the standard detergent system
we advise that you:
● Deactivate the "3 in 1" function.
● Fill up the dispensers for salt and rinse aid again.
● Adjust the water hardness setting to the highest setting perform up
to 3 normal washing programmes without loading any dishes.
● Adjust the water hardness setting according to the hardness of the
water in your area.
● Adjust the rinse aid dosage.
NOTE: When using 4 in 1 detergents that integrate also anti-glass corrosion
agent into "3 in 1" formula, please follow the same instruction as given for
"3 in 1" detergents above.
25
Operating instructions
156997 66/0en 23-10-2006 12:04 Pagina 25
