Indicator lights
Dry
1)
Illuminates when the drying phase is running.
End of programme
Illuminates when the washing programme has
ended.
Salt refilling
2)
Illuminates when special salt needs to be filled.
It can remain illuminated several hours after the
salt has been filled.
Rinse aid
2)
Illuminates when rinse aid needs to be filled.
1) As soon as you select a washing programme, the phase indicator lights for that programme will start flashing.
As the programme starts, the phase indicator lights turn off except for the indicator light of the phase in
progress which will remain lit with a static light.
2) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling
with salt and rinse aid is necessary.
The digital display
The digital display indicates:
• the level of hardness to which the water softener is set,
• the approximate remaining time of the running programme,
• activation/deactivation of the rinse aid dispenser (ONLY with Multi-tab function active),
• the end of a washing programme (a zero will appear in the digital display),
• the countdown of the delay start,
• fault codes concerning malfunction of the dishwasher.
Function buttons
The following functions can be set with the help of these buttons:
• setting of the water softener,
• cancel a washing programme or a delay start in progress,
• activation/deactivation of the Multi-tab function,
• activation/deactivation of the rinse aid dispenser when Multi-tab function is active.
Setting mode
The appliance is in setting mode when ALL programme button lights are illuminated.
Always remember that when performing the following operations:
– selecting a washing programme,
– setting the water softener,
– activating/deactivating the rinse aid,
the appliance MUST be in setting mode.
If a programme button light is illuminated, the last performed or selected programme is
still set. In this case, to return to setting mode, the programme has to be cancelled.
6
Control panel
