Problem Possible cause Possible solution
Incorrect level of the water
softener adjustment.
Adjust the water softener with
the correct level.
The salt container cap is not
closed correctly.
Make sure that the salt con-
tainer cap is closed correctly.
There are streaks, whitish
stains, or a bluish layer on
glasses and dishes.
The rinse aid quantity is too
high.
Decrease the rinse aid quantity.
Dry water drop stains on
glasses and dishes.
The rinse aid quantity is too
low.
Increase the rinse aid quantity.
The detergent can be the cause. Use a different brand of deter-
gent.
The dishes are wet. The washing programme was
without a drying phase or
with a decreased drying phase.
For better drying results, keep
the door ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is emp-
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
Activate the rinse aid dispenser.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold touchpad Delay and touchpad Start at the same time until the pro-
gramme indicators AUTO, PRO and SILENT flash.
4. Release touchpad Delay and touchpad Start.
5. Press touchpad Option.
• The programme indicators AUTO and SILENT go off.
• The programme indicator PRO continues to flash.
• The display shows the setting of the rinse aid dispenser.
The rinse aid dispenser is off.
The rinse aid dispenser is on.
6. Press touchpad Option to change the setting.
7. Deactivate the appliance to confirm.
TECHNICAL DATA
Dimensions Width 596 mm
Height 850 mm
22
Technical data
