2. Use the screws (on the top or on the side)
to install the appliance in position. Make
sure that the screws are tight.
To adjust the level of the appliance
A correct level of the appliance lets the door to close and seal correctly.
If the level of the appliance is not correct, the door catches on the sides of the cabinet.
Loosen or tighten the adjustable feet to adjust the level of the appliance.
After the adjustment of the level of the appliance,
assemble the adjustable plinth on the appliance.
Make sure that the bottom of the adjustable plinth
is aligned with the ground.
Water drain connection
Connect the water drain hose to:
• The sink spigot and attach it under the work surface. This prevents that the waste water
from the sink goes back into the appliance.
• A stand pipe with vent-hole. The internal di-
ameter must be minimum 4 cm.
Remove the sink plug when the appliance
drains the water to prevent that the water goes
back into the appliance.
The drain hose extension must not be longer
than 2 m. The internal diameter must not be
smaller than the diameter of the hose.
max 85 cm
min 40 cm
max 400 cm
24
Installation
