Indicator lights
DRYING Illuminates when the drying phase is running
.
END CYCLE Illuminates when the washing programme has
ended.
SALT
Illuminates when the special salt has run out.
1)
RINSE AID
Illuminates when the rinse aid has run out.
1)
CLOSE TAP Illuminates when the dishwasher does not fill
with water.
FILTER Illuminates from time to time, apart from the
amount of soil on the filters. Check and if
necessary clean the filters.
DOOR OPEN Illuminates when the door has not been properly
closed.
1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling
with salt and/or rinse aid is necessary.
The digital display indicates:
• the level of hardness to which the water softener is set,
• the approximate remaining time of the running programme,
•
activation/deactivation of the rinse aid dispenser (ONLY with Multitab function
active),
• the end of a washing programme (a zero will appear in the digital display),
• the countdown of the delay start,
• fault codes concerning malfunction of the dishwasher,
• activation/deactivation of the audible signals.
Function buttons
The following functions can be set with the help of these buttons:
• setting of the water softener,
• cancel a washing programme or a delay start in progress,
• activation/deactivation of the rinse aid dispenser when Multitab function is ac-
tive,
Control panel
9
