27
Daily use
Select and start a washing programme
Select the washing programme and delay start with the door slightly opened.
The start of the programme or the countdown of the delay start will occur only
after the closure of the door. Until then it is possible to modify the settings.
11..
Check that the baskets have been loaded correctly and that the spray arms are
free to rotate
22..
Check that the water tap is opened
33..
Press the On/Off button. The dishwasher must be in setting mode.
44..
Press the button corresponding to the required programme (see ‘Washing
programmes’ chart).
When a programme has been selected the corresponding light will illuminate.
The programme phase lights foreseen for that programme and PROG :TIME light
illuminate.
Close the dishwasher door, the programme starts automatically.
The PROG. TIME light remains illuminated and the lights of the phases will turn
off except for the phase underway.
SSeettttiinngg aanndd ssttaarrttiinngg tthhee pprrooggrraammmmee wwiitthh ddeellaayy ssttaarrtt
11..
After having selected the washing programme, press the delay start button
until the flashing number of hours for the delay start will appear in the digital
display. The commencement of the selected washing programme can be
delayed from 1 to 19 hours.
22..
Close the dishwasher door, the countdown starts automatically and the number
in the display stops flashing.
33..
The countdown will decrease with steps of 1 hour.
44..
The opening of the door will interrupt the countdown. Close the door; the
countdown will continue from the point at which it was interrupted.
55..
Once the delay start has elapsed the programme will start automatically.
With the delay start function set, the PROG. TIME light is off. Once the
countdown of the delay start has elapsed, the washing programme will start
automatically and the PROG. TIME light will illuminate.
