Indicator lights
Rinse Aid
1)
The indicator light comes on when it is necessary
to fill the rinse aid container. Refer to 'Use of rinse
aid'.
1) The indicator light is off while a washing program operates.
Multitab button
Press this button to activate/deactivate the
multitab function. Refer to 'Multitab function'.
Delay start button
Use the delay start button to delay the start
of the washing program with an interval be-
tween 1 and 9 hours. Refer to 'Select and
start a washing program'.
Digital display
The display shows:
• program in progress,
•setting mode,
• number of hours in delay start.
Function buttons
Use the function buttons for these opera-
tions:
• to set the water softener. Refer to 'Setting
the water softener'.
• to deactivate/activate the rinse aid dis-
penser when multitab function is active.
Refer to 'Multitab function'.
• to cancel the washing program in progress
or a delay start in progress. Refer to 'Select
and start a washing program'.
Setting mode
The appliance is in setting mode when all
program indicator lights are on and the digital
display shows 3 horizontal bars.
The appliance must be in setting mode for
these operations:
– to set a washing program,
– to set the water softener level,
– to deactivate/activate the rinse aid dis-
penser.
If a program indicator light is on and the dig-
ital display shows only 1 horizontal bar, can-
cel the program to go back to the setting
mode. Refer to 'Select and start a washing
program'.
Use of the appliance
Refer to specified instructions for each step
of the procedure.
1. Make a check if the water softener level
is correct for the water hardness in your
area. If necessary set the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the dish-
washer.
5. Set the correct washing program for the
type of load and soil.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing program.
Setting the water softener
The water softener removes minerals and
salts from the water supply. Minerals and
salts can have bad effect on the operation of
the appliance.
Water hardness is measured in equivalent
scales:
• mg/I (millimol per litre)
• ppm (parts per million),
• mmol/l (millimol per litre - international unit
for the hardness of water).
Adjust the water softener in to the water
hardness in your area. If necessary, contact
your local water authority.
Water hardness Water hardness setting
mg/l ppm mmol/l manually electronically
910 - 1250 910 - 1250 9,1 - 12,5 2 10
760 - 909 760 - 909 7,6 - 9,0 2 9
6 electrolux
