Features include broad temperature and high DS ratio. This
allows the user to monitor the target from a long distance;
far away from potential risk.
FEATURES:
• High DS ratio
• Adjustable emissivity from 0.1 to 1.00 in 0.01 steps
• Ultra low power consumption in shutdown mode
• Extended long time measuring reliability
• Laser sighting On/Off is switchable
• Backlit LCD display
• °F or °C selectable
• Electronic trigger lock
• Temperature data storage
• Audible alarms
APPLICATIONS:
• Manufacturing processes of semiconductor technology
• Automotive repair and maintenance
• Food safety and processing
• HVAC energy audits
• Electrical troubleshooting
• Testing terminals on circuits
• Scientific experiment
• Air conditioning
SAFETY INFORMATION:
Read the following safety information carefully before
attempting to operate or service the meter. Only qualified
personnel should perform repairs or services
not covered in this manual.
LASER WARNING NOTE!
Do not point laser directly at eyes.
Use caution around reflective surfaces.
Keep out of reach of children!
CAUTIONS!
DO NOT submerge the unit in the water.
This product is not designed for use in medical evaluations.
The product can only be used to measure body temperature
for reference. It is meant for industrial and scientific
purposes.
SAFETY SYMBOLS
Dangerous, refer to this manual before using the
meter.
CE Certification
This instrument conforms to the following standards:
EN61326: Electrical equipment for measurement, control and
laboratory use.
IEC61000-4-2: Electrostatic discharge immunity test.
IEC61000-4-3: Radiated, radio-frequency, Electromagnetic
field immunity test.
IEC61000-4-8: Power frequency magnetic field immunity
test.
Tests were conducted using a frequency range of 80-
1000MHz with the instrument in three orientations.
The average error for the three orientations is ±1.0 °F
(±0.5 °C) at 3V/m throughout the spectrum. However,
between 781-1000MHz at 3V/m, the instrument may not
meet its stated accuracy.
The device may not be disposed in the trash. It
promotes the re-use recycling and other forms of
recovery of used materials and components, and to improve
the environmental performance of all operators
(manufacturers, traders, treatment facilities) involved in the
life cycle of products. Dispose of the product appropriately
in accordance with relevant regulations.
