P-660R-D Series Quick Start Guide
3
1DSL: Connect the Prestige to a telephone jack using a telephone wire.
2 LAN 10/100M: Use an Ethernet cable to connect a computer to the LAN
port for initial configuration and/or Internet access.
3POWER: Use the included power adaptor to connect the POWER
socket to an appropriate power source.
After you’ve made the connections, push in the power button to turn on the
Prestige. Look at the front panel LEDs. The PWR/SYS LED blinks while
performing system testing. The PWR/SYS LED then turns steady on if the
testing is successful. The 10/100M LED turns on if the LAN port is properly
connected.
2 Configuration for Internet Access
You may configure the Prestige for Internet access in any one of these
ways:
• Configuration Genie
• Zero Configuration
• Web Configurator Internet Access Wizard
