P-660HN Series Support Notes
71
All contents copyright © 2010 ZyXEL Communications Corporation.
networks that we call 'IP Alias 1' and 'IP Alias 2' can be configured in
Network -> LAN -> IP Alias.
There are three internal virtual LAN interfaces for the P-660HN-T1A to route
the packets from/to the three networks correctly. They are enif0 for the major
network, enif0:0 for the IP alias 1 and enif0:1 for the IP alias 2. Therefore,
three routes are created in the P-660HN-T1A as shown below when the three
networks are configured. If the P-660HN-T1A's DHCP is also enabled, the IP
pool for the clients can be any of the three networks.
You can edit filter rule to accept or deny LAN packets from/to the IP alias 1/2
go through the P-660HN-T1A by command in CLI:
lan index [index number]
Usage: index number =1 main LAN
2 IP Alias#1
3 IP Alias#2
lan filter <incoming|outgoing> <tcpip|generic> [set#]
Usage: set#= the corresponding filter set number you‟ve configured
lan save
IP Alias Setup
(1) Edit the first network in Web Configurator, Advanced Setup, Network ->
LAN -> IP/DHCP Setup by configuring the P-660HN-T1A's first LAN IP
address.
