Microphone Connector Lock
The Connector Lock can be added to the microphone plug to prevent the
microphone plug from accidentally coming out during use. The
connector locking pin attaches to the mic plug and fits into the oval hole
next to the MIC jack when the back cover of the transmitter is opened.
To attach the Connector Lock, unscrew the plug shell and slip on the
locking clip as shown. Then tighten down the plug shell.
To Insert or Remove the Mic Plug:
1. Open the back of the Transmitter case. First open the battery
compartment flap. Then open the back of the case like a book, as
shown.
2. Insert or withdraw the mic plug and locking pin as shown. Be sure to
push the plug all the way in.
3. Close the back cover and battery compartment to lock the mic plug in.
Inserting and Removing the Connector Lock
5
