PARTS SUPPLIED:
■ Two #8-18 x 5/8" Phillips special head screws, to
secure dishwasher to underside of countertop or
sides of cabinets. (Screws located in user bag.)
■ Side and top trim pieces
■ Trim Panel Accessory Kit (not shown).
Model PDW9700 only
■ Drain Hose, Drain Hose Hanger and Hose Clamp
Installation Preparation
TOOLS YOU WILL NEED:
■ Phillips head screwdriver
■ 1/4" and 5/16" nutdriver
■ 6" Adjustable wrench
■ Level
■ Carpenters square
■ Measuring tape
■ Safety glasses
■ Flashlight
■ Bucket to catch water when flushing the line
■ 15/16" socket (optional for skid removal)
■ Gloves
For New Installations Only:
■ Tubing cutter
■ Drill and appropriate bits
■ Hole saw set
MATERIALS YOU WILL NEED:
■ Ferrule, compression nut and 90° Elbow (3/8" NPT
external thread on one end, opposite end sized to
fit water supply)
■ Thread seal tape
■ UL Listed wire nuts (3)
Materials For New Installations Only:
■ Air gap for drain hose, if required
■ Waste tee for house plumbing, if applicable
■ Electrical cable or power cord, if applicable
■ Screw type hose clamps
■ Strain relief for electrical connection
■ Hand shut-off valve
■ Water line 3/8" min. copper
■ Coupler for extending drain line, if applicable
#8 Phillips
Special Head Screws
5/8” long
Hose Clamp
Drain Hose
Trim Pieces
Hand
Shut-Off
Valve
90° Elbow,
Ferrule and
Compression Nut
Thread
Seal Tape
Wire Nuts (3)
Hot Water LineElectrical Cable
(or Power Cord, if applicable)
Waste Tee
Coupler
Air
Gap
Screw Type
Hose Clamps
Strain Relief
Phillips
Head
Screwdriver
1/4" and
5/16" Nutdriver
Level
Carpenters
Square
1/4" and
5/16" Socket
6" Adjustable
Wrench
Tubing Cutter
Measuring Tape
Safety GlassesFlashlight
Gloves
Bucket Hole Saw Set Drill and Bits
#8 Phillips Special
Head Screws
2
Drain Hose Hanger
