6
The rinse aid facilitates drying and prevents the
formation of unsightly spots, streaks and
carbonate deposits on crockery. Before using
the dishwasher for the first time, fill the rinse aid
dispenser. Thereafter, regularly check the rinse
aid level.
Only use rinse aids recommended for use in
domestic dishwashers.
1.
Unscrew the cap. Fill the dispenser with rinse
aid while monitoring the level indicator
D
(about 130 ml).
2. Immediately wipe away any spilt rinse aid
to prevent excess suds which may spoil
washing results.
3.
Close the cap or lid
.
How to adjust the rinse aid
dosage regulator.
(Open the cover and close again following
adjustment). Factory setting: 3.
If you are not satisfied with washing or drying
results, change the dial setting with a spoon
handle or coin (see
E
in the drawing).
If crockery is prone to whitish streaks, reduce the
dosage by turning the dial to a lower setting.
If instead crockery is wet, dull or spotted,
increase the dosage by turning the dial to a
higher setting.
Rinse aid level indicator (visual or electric
indicator depending on the model installed).
Visual indicator:
light
=empty
dark
=full.
Only use detergents recommended for use in
domestic dishwashers. If you use “new
generation” enzyme-based detergents,
select the Bio programmes which are also
suitable for all normal detergents.
If you use detergents in pellet form, follow the
manufacturer’s directions for use.
Always use the recommended dosage stated on
the detergent pack. The use of detergent in
excess of the recommended dosage may cause
suds, poor washing results and pollution.
The recommended dosage varies between
different brands.
Only fill the detergent dispenser prior to start
a wash programme.
To open on lid (see
C
in the drawing).
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
