Drain Hose
COIlneCtiOIl (Recommended Method)
-
Air-gap Kit (if local code requires it)
Part No. 300096
/
Waste Tee (Part No. 675149)
(Entry MUST be above trap)
20” Minimum
II
1
SINK AT LEFT
-
-----IIIII
I ;;
I I
20” Minimum
-
SINK AT RIGHT
Push your dishwasher into place, feeding the drain
hose through the l-1/2”, or larger, hole you have
already cut for it.
IMPORTANT: There must not be any sharp
bends, kinks or
twists in the installed drain
CAUTION: Be sure to remove knock out
hose.
plug from disposer inlet before attaching
drain hose.
Keep pulling hose out through hole while
pushing dishwasher into position. Connect
drain hose and secure with hose clamp from
parts bag.
NOTE: Be sure to periodically clean the drain
air-gap line. Refer to the instructions packed
with the drain air-gap for details.
8
