GB
-1-
Chart
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
5019 396 03548
PROGRAMS
SELECTION
BUTTON
Push “Programs”
button (repeatedly)
until the indicator of
the required program
lights up (see “Table
of programs” - next
page).
ANTIBACTERIAL
RINSE
3)
This function activates an
antibacterial rinse at the
end of the wash cycle,
guaranteeing a further
reduction of bacteria. Press
the button to activate or
deactivate the function.
This function can be used
with the programs
indicated in the table of
programs. The dishwasher
door must be kept shut for
the entire duration of the
program in order to
guarantee reduction of
bacteria. If the door is
opened the indicator lamp
starts flashing.
DELAYED START
BUTTON
The wash cycle can
be programmed to
start after 2, 4 or 8
hours. Then press
the Start button. The
wash program will
start after the set
time.
START/RESUME
BUTTON
Push this button to start
the selected program:
the indicator lights up and
goes off at the end of the
program. When the door
is opened during a
washing cycle, the cycle is
temporarily paused: the
Start indicator blinks. To
resume the cycle close
the door and push Start
button again.
SALT
INDICATOR
When lit (at the
end of the cycle),
the salt reservoir
needs to be
refilled.
RINSE AID
INDICATOR
When lit (at the
end of the cycle),
the rinse aid
dispenser needs
to be refilled.
TABLET SETTING
This setting allows to
optimize the cycle
performances according the
type of detergent used.
Push the Tablet button for 3
seconds (until the indicator
lights up) if you are using the
combined detergents in
tablet (rinse aid, salt and
deteregent in 1 dose). If you
are using powder detergent
or liquid detergent, the
Tablet indicator on the
control panel has to be off.
CANCEL/OFF
BUTTON
Push this button to switch
off the control panel.
If pressed when a
program is running it
cancels the program
ongoing draining water
for 1 minute.
If pressed when the
dishwasher is switched off
it drains any possible
liquids from dishwasher
(1 minute process).
If the indicator flashes
repeatedly, see page 9 -
chapter ”What to do if ...”.
Quick reference guide
