
39
Cold phase
•
Each programme contains a 10-minute cold
phase prior to program completion to allow
the laundry and the drum to cool down.
•
The cold phase must not be shortened,
interrupted or even left out: increased
creasing and danger of burning.
Programme end
•
The end of the programme is signalled by a
buzzer.
•
This serves to remind you that the drying
programme is finished and that the laundry
can be removed.
Crease protection
•
If the laundry is not removed after the
programme has finished, the 20 minute long
crease protection will start automatically. In
order to avoid creasing, the laundry is
rearranged and loosened.
•
The crease protection phase may be
interrupted at any time in order to remove the
laundry.
Programme finished
•
In position the timer programme has
finished; the laundry must now be removed.
Switch Off
•
The drying programme selector knob must
be set to position.
•
Switch off the appliance by pressing the “ON/
OFF” button. This may be done after the
drying programme has finished, at the start,
during, or at the end of the crease protection
phase.
•
The indicator lamp above the “ON/OFF” button
will go out.
•
Turn the water supply tap(s) off.
DRYING - COLD PHASE / PROGRAMME END