- the sensor technology adapts drum movement, water, energy and programme duration to your wash load
5019 400 00450
CONSUMPTION DATA
Power consumption in Off mode 0.16 W / in left-on mode 0.16 W
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
without “Rapid” with “Rapid”
Mixed 40 4.0 60 0.64 1:00 —
Cotton 95 8.0 80** 2.60 2:40 —
Cotton 60 8.0 62 1.58 2:20 1:45
Cotton 40 8.0 55 0.78 2:05 1:15
Synthetics 60 3.0 50** 0.93 1:37 1:12
Synthetics 40 3.0 45 0.50 1:20 0:55
Delicates 40 1.5 65 0.60 0:50 —
Delicates 30 1.5 65 0.37 0:46 —
Wool/Handwash 40 1.0 49 0.55 0:40 —
White 40 8.0 53 0.59 2:20 —
Light colours 40 4.0 49 0.39 1:20 —
Dark 40 4.0 39 0.48 1:40 1:15
Speed 15 30 3.0 18 0.08 0:15 —
AquaEco 40 3.0 19 0.38 1:00 —
Cotton *
60 8.0 54 0.82 4:00 —
Cotton *
60 4.0 36 0.64 3:30*** —
Cotton *
40 4.0 36 0.58 3:30*** —
P01 – Big items 40 3.0 53 0.61 1:30 —
P02 – Baby 60 4.0 57** 0.55 1:30 1:10
P03 – Bed linen 60 3.5 19 1.65 2:00 —
P04 – Jeans 40 4.0 53 0.42 1:30 1:10
P05 – Business 40 1.5 65 0.60 0:50 —
P06 – Sport 30 3.0 51 0.59 1:35 1:11
P07 – Cashmere 30 1.0 40 0.45 0:36 —
P08 – Mini load 30 1.0 26 0.24 0:45 —
Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456.
In the home, they may vary depending on the individual water supply pressure and temperature, the load
and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.
15 °C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot
fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced
heating times, depending on the individual hot fill inlet water temperature.
Water and energy consumptions refer to the default setting of the programmes, with temperature and
load as indicated in the table; selecting any options or changing the spin speed will also change the
consumption data.
The programme duration may differ from the values indicated above as it depends on the operation
conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).
** To reduce the water temperature, some cold water is added at the end of the main wash cycle
before the water is drained.
*** Automatic adaptation of programme duration after detection of wash load.
* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature
may deviate from the declared cycle temperature.
Load the laundry, close the door and turn the
programme selector to the desired programme –
the “Start/Pause” indicator blinks. The temperature
and spin speed shown on the display can be
altered by pressing the “Temperature” or “Spin”
button. If you do not use the Dosing Aid, add
detergent now.
The washing machine is designed to save energy;
therefore, if you have selected a programme but
do not start it within about a quarter of an hour, it
will switch off automatically. To switch it on again,
turn the programme selector to “Off/O” and then
to the desired programme again.
This feature offers the possibility to select and save,
out of a list of 8 special programmes, the one that
most meets your needs.
When you select the “MyProgram” position, a
code ranging from “P01” to “P08” will appear on
the display (see programme table to understand
which programme corresponds to the displayed
code).
Use the “+” and “–” buttons to select the available
programmes, and button “Ok” to confirm your
choice. If you do not confirm it within a few seconds,
the selected programme is automatically confirmed,
and its default settings appear on the display.
You can now select options or modify temperature/
spin speed, as you do it for any other programme,
according to the possibilities indicated in the
programme table. Once a programme of the
“MyProgram” list has been confirmed, it will be
remembered next time you select “MyProgram”
on the selector.
If the combination programme/option or option/
option is not possible, the indicator switches off
automatically.
For certain programmes, an option may already be
preset; if you want you can deselect it.
“15° Green & Clean” button
• Enables ecological washing by saving energy
used for water heating, while maintaining a
good wash result.
• Bright colours live longer with this option; this
was tested and approved by the German “wfk”
laundry research institute.
• Recommendable for lightly soiled laundry
without stains.
• Make sure that your detergent is suitable for
cold wash temperatures (15 or 20°C).
• Not selectable for Cotton 70 - 95°C.
“BioStain 15°” button
• Supports the removal of stains.
• The programme you selected will begin with a
cold water wash phase; this will prolong the
programme duration by about 10 minutes.
• Appropriate for all kinds of stains, except
grease/oil.
• Pre-treatment recommended for obstinate
stains.
• Not selectable for Cotton 70 - 95°C.
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for only lightly soiled laundry.
• Not selectable for Cotton 70 - 95 °C.
“Prewash” button
• Adds a prewash cycle to the wash programme
selected; prolongs the programme by about a
quarter of an hour.
• Recommended for heavily soiled laundry
(e.g. containing sand or granular dirt).
• Do not use liquid detergent for the main wash
when activating the “Prewash” option.
Soil level” button
• Adapts the programme duration to the soil level
of your laundry. Also influences the detergent
quantity recommendation when using the
“Dosing Aid” button.
= lightly soiled - = normally soiled -
= heavily soiled
Not all soil levels are selectable for each
programme.
LOAD LAUNDRY AND SELECT
PROGRAMME
MyProgram
SELECT OPTIONS IF DESIRED
