5
Never move the appliance by carrying it at the
worktop.
TRANSIT BOLTS
The appliance is fitted with transit bolts to prevent
internal damage during transport.
Before using the machine you must remove
the transit bolts (Fig. 1).
1. Slacken the four bolts with the wrench
supplied (Fig. 2).
2. Unscrew the bolts by hand.
3. Holding the bolt head, pull each bolt through
the wide part of the holes.
4. Close the holes with the plastic covers supplied;
insert the covers in the wide part of the hole and
slide them toward the narrow part until they click
into place (Fig. 3).
5. Keep the transit bolts for future use.
Important
Whenever the appliance is transported, the transit
bolts must be refitted.
Pry up the plastic covers with a screwdriver, slide
them in the opposite direction to the arrow and
remove. Insert the transit bolts, performing the
steps for removal in reverse order.
INSTALLATION INSTRUCTIONS
Fig. 1
Fig. 2
Fig. 3
