5019 407 00787
GB
TRKD 4666
Quick Reference Guide
Before using the machine, please also read the instructions for use carefully!
(Subject to technical modifications)
4
Programme selector knob
The drying programme is selected by turning
this knob.
“Départ/Start” button
The drying programme is started by pressing
this button. The indicator lamp flashes during
the selection phase and lights up during
drying.
Indicator lamps
Filter
The indicator lamp lights up when the filter
and/or heat exchanger need cleaning.
Clean the filter at the end of every cycle.
Water container
The indicator lamp lights up when the water
container needs to be emptied. The drying
cycle is automatically interrupted. Empty the
container and restart the drying programme.
Empty the water container after every
drying cycle
.
Clean heat exchanger
The Led lights up after 30 cycles when the
heat exchanger needs to be cleaned. Clean
the heat exchanger. Then for reset the led
indication, turn the programme selector
knob to the vertical position indicated by the
symbol “ ” and press the
“Départ/
Start”
button during 3 seconds until led
switches off.
Overdry protection
The indicator lamp lights up when a humidity
controlled program is selected, to indicate
the working protection function. Function is
not active in time controlled programmes
10’, 20’, 30’, 40’, 60’, 90’ and “Airing”
“”.
Programme sequence
Overdry
protection
Drying
Anti-
crease
End
of cycle
Options
Gentle
Reduces drying intensity (recommended
for delicate items).
Anticrease
Prevents laundry from creasing up to 12
hours. The automatic buzzer signal can be
switch-off by selecting anti-crease.
Start delay
Delays the start of the drying cycle by 3 to 9
hours.
Press the start delay button and selection
appears on the programme sequence. Then
press the
“Départ/Start”
button to confirm
the final selection and to start the dryer.
During start delay phase, the time selected
led is blinking. During countdown, the
remaining time is indicated. To cancel the
previously set time delay, set the the
programme selection knob to “ ” or press
the start delay button to make the 3 lights off.
+
