34
1. Close water tap and screw o the inlet hose.
1
2
2. Clean the mesh lter at the hose’s end
carefully with a ne brush.
3. Now unscrew the inlet hose on the back of the
washing machine by hand.
Pull out the mesh lter from the valve on the back
of the washing machine with pliers and carefully
clean it.
CLEANING THE MESH FILTERS
IN THE WATER SUPPLY HOSE
4. Insert the mesh lter again. Connect the inlet
hose to water tap and washing machine again. Do
not use a tool to connect the inlet hose. Open the
water tap and check that all connections are tight.
2
1
