Productos de la Marca Whirlpool

User manual

Remove any manufacturing debris:

•

Selectthe“Cotton”programmeatatemperatureof60°C.

• Pourasmallquantityofdetergentpowder intothe

main wash compartment of the detergent dispenser

(maximum 1/3 of the quantity the detergent manufacturer

recommends for lightly soiled laundry).

PREPARING THE LAUNDRY

Empty pockets

• Coins,paperclips,etc.coulddamagetheloadand

the washing machine components.

• Tissues will break down during the wash cycle,

and the fragments will have to be subsequently

removed by hand.

Close all zippers, buttons, and hooks. Tie all

ribbons or belts

• Insert the smaller garments (e.g. nylon hosiery,

belts, etc.) and garments with hooks into a fabric

bag or a pillowcase with a zipper. Remove any

rings from curtains, or else place the curtains

inside a fabric bag together with the rings.

• Starttheprogrammewithout adding any laundry (with

empty drum).

• Seesection“DAILYUSE”formoreinformationonhowto

select and start a programme.

Fabric type / Symbol on the wash label

•Cottons,mixedbres,easycare/synthetics,wool,handwash

items.

• Colour

Separate coloured and white items. Wash new coloured

articles separately.

• Size

Wash items of dierent sizes in the same wash load, to

improve washing eciency and distribution of the articles

in the drum.

• Delicates

Wash delicate items separately; they require gentle

treatment.

Change temperature, if needed

Press the “Temperature”button to progressively

lowe

r the temperature setting until cold

wash has been set (“- -“ will be shown on the

display). Pressing the button again sets the

highest possible setting.

Change spin speed, if needed

Press the “Spin” button to progressively decrease

the spin speed until the spin cycle is turned off

(“0” will be shown on the display). Pressing

the button again sets the highest possible

setting.

Select options, if needed

Press the button to select the option; the respective

symbol on display illuminates.

Press the button again to cancel the option; the light

extinguishes.

HOW TO USE THE WASHING MACHINE

1. Load laundry

Open the door andload the laundry. Load the

articles one at a time loosely into the drum,

without overfilling. Observe the load sizes given

in the “PROGRAMME CHART” table. Overloading

the machine will result in unsatisfactory washing

results and creased laundry.

2. Close door

Make sure that no laundry gets stuck

between door glass and rubber seal. Close

the door so that you can hear it click shut.

3. Open water tap

Make sure that the washing machine is connected

to the water mains. Open the water tap.

Switch on washing machine

Press the “ON/OFF” , the “Start/Pause” lamp ashes

slowly.

4. Set the desired programme

Select the required programme with the “Programme

selector” dial. The duration of the wash cycle is shown

on the display. The washing machine automatically

displays the maximum temperature and spin speed

settings possible for the selected programme. Adjust

the temperature and/or spin speed settings if needed

with the relative buttons.

FIRST TIME USE

DAIL

Y USE

HOW TO USE THE APPLIANCE

! If the selected option is incompatible with the programme

set, the incompatibility will be signalled by a buzzer (3

beeps) and the corresponding indicator light will ash.

! If the selected option is incompatible with another

previously set option, only the most recent selection will

remain active .

•