53
Waypoints
The memory of the navigation system allows a total of
50 waypoints to be stored. In the example shown,
a tour in which one waypoint has already been set and
20 points are still free is recorded.
A maximum of 40 waypoints can be stored in a tour.
The waypoints of all tours are stored in a list;
they can be called up using the function
”Waypoint list”.
During active destination guidance, waypoints of the
current tour can be called up using the function
”Route list”. An acoustic signal confirms that a waypoint
has been reached.
Driving tours in the opposite direction
This function can be used to return to the starting point
of a tour.
The stored waypoints are driven in the opposite
direction.
Destination guidance using offroad tours
In addition to the display in which the next waypoint is
indicated by a red flag, an arrow within the display
shows the direction that is to be driven. Voice output is
not used in destination guidance.
Stop recording
Destination
Stop over
Route opt.
Settings
Offroad tour recording
used up till now: 1 WP
free: 20 WP
Set waypoints by:
Select tour
Record tour
Enter tour
Delete tour
Edit tour
Waypoint list
Offroad tour
back with ESC
Tour waypoints
1 Rock
2 Tree
3 Bridge
4 Tower
5 Hunting lodge
back with ESC
OK
whole tour
partially
Opposite direct.
back with ESC
Drive:
Position 1
from:
1 Rock
to:
5 Hunting lodge
1.4 km
A
500 m
S297_080
S297_077
S297_081
S297_082
S297_095
