3
To prepare the Vodafone Mobile Wi-Fi R212, you need to 1.
insert your SIM (and MicroSDHC card if you are using one
for fi le storage and sharing) before use. Using aerials may
improve mobile network signal reception.
The device has a built-in battery, and is now ready to use - 2.
plug it into the mains or your PC. The battery will be charged
in the background. Make sure the device is fully charged
(approximately 3 hours on mains) before using it in battery
mode. Please only use the supplied charger with this device.
Switch on the device by pressing and holding the power 3.
button for 3 seconds. The device will go through its
start-up sequence, and will automatically connect to the
network unless a PIN code is required. Check the display for
connection status.
Getting
started:
Step 1 of 2
Note: Once setup
is complete, when
connected to the R212
via USB (and you have
installed the software
onto your PC) you can
access the configuration
screen by clicking on
the Mobile Wi-Fi desktop
icon
.
Alternatively, if you
are connected over
Wi-Fi, you can enter the
following addresses into
your browser:
http://VodafoneMobile.
wifi or http://192.168.0.1
You may want to save
these addresses as
favourites in your
browser so you can
access the Mobile Wi-Fi
web UI application
screen easily.
SIM
card
Primary aerial
if used
Micro SD
card
Secondary
aerial if used
