Advanced Configuration Guide
Vodafone Mobile Broadband Hotspot
Vodafone MiFi 2352 October 2009
Version 1.3
8
1.3 Install SIM Card and Battery
Before connecting the Vodafone Mobile Broadband Hotspot to your computer for the first
time you must insert the SIM card supplied by your service provider and insert and charge
the battery.
IMPORTANT: The battery must be fully charged before using the Vodafone Mobile
Broadband Hotspot the first time. After the initial use and set up, you may use the device
with battery, wall, vehicle, or USB power.
➊ Slide open the door at the bottom of the device by pushing the 2 tags on the left and
right of the bottom cover. The cover should slide open easily. Never use any sort of sharp
instrument when opening the back of the device as this could damage the battery.
➋ Insert the SIM card into the SIM slot as shown.
➌ Insert the battery, lining up the contact points as shown and replace the door on the
device.
➍ Connect the wall charger to the Vodafone Mobile Broadband Hotspot.
Charge for a minimum of 4 hours before use with the device switched off (i.e. the WLAN
LED is not illuminated). The power button LED will flash amber while the device is
charging and glow solid amber once charging is complete.
1.4 Battery Tips
