Rear Panel Connections
5
.
www.velodyne.com
VRP User’s Manual
Figure 1.VRP Rear Panel Connections
Figure 1 shows the connections on the rear panel of the VRP. Following are brief descriptions
of the connections described in Figure 1. More detail of these connections can be found below:
(1)
SPEAKER LEVEL INPUT ter
minals - Connect these input ter
minals to the speaker
output terminals of your amplifier or receiver.
(2)
SPEAKER LEVEL OUTPUT ter
minals - The speaker
-level signal to the front speakers
is output from these terminals.
(3) LINE INPUT jacks - Connect these jacks to the LINE OUT jacks of the amplifier.
(4) LOW-PASS CROSSOVER - Use this knob to select the high-frequency range at which
you wish to cut-of
f the signal to the subwoofer
.
