Error Indications
17
Dishes were not properly loaded
Selected wash cycle was not
powerful enough
Select a more intensive wash cycle.
Use more or change brand of detergent.
Items are blocking the path of the
spray arm
Rearrange items so the spray arm can
fully rotate.
The lters are dirty/clogged or
installed incorrectly
Clean the lter and/or check installation.
Combination of too much detergent
with soft water
Use less detergent and/or select the
shortest wash cycle to clean glassware.
The lters may be dirty or clogged
Clean lters and/or check installation.
Black or gray marks
on dishes
Utensils may have rubbed against
dishes
Use a mild abrasive cleaner to eliminate
marks. Load more carefully.
Detergent left in
dispenser cup
Dishes blocked the detergent cup
Dishes were removed too soon
Do not remove dishes from the
dishwasher immediately after wash.
Short cycles have lower cleaning
performance. Choose a more intensive
cycle.
Dishes/cutlery have low-quality
coating
Water drainage is more difcult with
these items. Dishes/cutlery of this type
are not suitable in this dishwasher.
SPEED program light
ickers
Water supply is not turned on or
restricted; or water pressure too low
MINI PARTY program
light ickers
Some element of dishwasher leaks.
WARNING!
If overow occurs, turn off the main water supply before calling for service.
If there is water in the base pan due to an overll or small leak, the water should be removed
before restarting the dishwasher.
